Wurkkos TS32 USB C Rechargeable Powerful Flashlight

The Wurkkos TS32 is a powerful barrel torch capable of reaching an impressive 15000 lumens when turned on the Turbo output level. It is equipped with 12*LH351D/519A + 1* Luminus SFT40 which allow to deliver two completely different beams. The single Luminus SFT40 in fact generates a beam, thanks to the deep and wide reflector where it is inserted, a completely very direct and very bright spot beam capable of illuminating up to 590 meters away. The twelve 12*LH351D/519A LEDs placed in a circle instead produce a totally flood beam, ideal for illuminating everything in the immediate vicinity. The flashlight is powered by three 21,700-type rechargeable Li-ion batteries, and can charge them via type-c charging interface. Furthermore, the charging interface is bidirectional, therefore it is possible to use the flashlight as if it were a Power Bank to power any type of electronic device such as smartphones and tablets. The user interface has two modes of use: the first stepped mode and the second stepless ramping mode. The step mode provides that the output is divided into different levels already established, while the ramping mode does not provide pre-established levels but it is the user who chooses the level he prefers in the range of possible values from minimum to maximum. The Driver is a FET circuit (floodlight) + Buck constant current circuit (Spotlight). The beam has the following characteristics: spotlight 7°, floodlight 78°. The operating voltage is 2.7V – 4.2V. The dimensions of this flashlight are 132.4 mm in length and 62.4 in the diameter of the head while the weight is 435 grams excluding battery. The body is entirely made of aeronautical aluminum alloy with a type III anodized finish which gives the torch high levels of solidity, robustness, resistance to shocks, scratches and bad weather, as well as perfect heat exchange. The lens is made of very thick mineral glass with anti-reflection treatment. The water resistance is given according to the IP68 standard therefore the flashlight is resistant to splashes and dust. The TS32 has two different switches with which it is possible to interact with the user interface: one switch is used to modify the type of output by choosing between flood, spot or spot+flood and the other is used to vary the brightness level. Between the two switches there are LED status indicators that provide information on the remaining capacity of the cells or on the recharging process: A flashing indicator means charge less than 25%, a lit indicator and a flashing one means charge between 25 % and 50%, two indicators on and one indicator flashing means charge between 50% and 75%, three indicators on and one indicator flashing means charge below 75%, four indicators on means 100% charge . The torch also has low voltage protection, therefore if the cell voltage drops below 2.7 volts the light will automatically close to avoid damage to the battery due to over discharge.

1. Emitter: 12*Nichia 519A 5000K+ 1* Luminus SFT40 or 12* LH351D 5000k +1* Luminus SFT40
2. Reflector: Smooth reflector
3. Driver: FET circuit(floodlight)+Buck constant current circuit(Spotlight)
4. Beam angle:spotlight 7°, floodlight 78°
5. Operating voltage: 2.7V – 4.2V

1. Battery options: 3*21700 Li-Ion battery
2. Dimension: 132.4mm (length)x 62.4mm (head diameter)
3. Weight: 435±1 grams (without battery)
4. Flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC manufactured to hard-anodized to military grade specificationtypeIII, anti-abrasive finish to get solid built body, anti-crash geometry and better heat exchange.
5. Toughened mineral glass lens
6. Water resistance i.a.w. IP68
7. Mode Memory: memorizes the last brightness level used in the general modes (except Strobe)
8. Reverse polarity protection to protect against improper battery installation.
9. Advanced Temperature Regulation (ATR) technology: ATR will reduce the brightness level automatically when the driver temperature reaches 55℃to prevent overheating.