Weltool W4Pro TAC LEP flashlight

compatible with LF61/LF61Y Diffusing Filter

The Weltool W4Pro TAC is the tactical version of W4Pro, it is a LEP flashlight that throws 3712 yards. The luminous intensity reaches 2,882,000 candles, 568 lumens. It uses a 21700 rechargeable Li-ion battery, uses a customized LEP light source, and then passes through the lens reflection system to form a high beam. By default, high mode is on, half press Momentary or full press to lock and continue to work, even if Momentary is used frequently, it will not switch modes and is always high; The hidden mode is strobe and low，In the off state, you can half press 3 times to turn on the strobe, and you can switch to low. W4Pro TAC has almost no spillage, suitable for field research, sea rescue, long distance indication, etc. it is specially designed for special lighting. The material of the body is in aeronautical aluminum, black hard anodized, resistant to abrasion and wear. The optical system is formed by a reflective system equipped with a convex acrylic lens. The light source is a special LEP module with wavelength 400-700nm, 6000-7000K and the lifespan is about 10,000 hours. Power is supplied by 1 rechargeable Li-ion battery 21700 (included in the package). The switch is in the queue and has been tested for over 50,000. The W4Pro Tac is also a very safe torch as it has various protection systems: temperature control system: when the temperature of the torch is too high, the torch will automatically reduce the brightness to avoid overheating, reverse polarity protection , over-discharge protection, and low-battery reminder function. The resistance to falls is given up to one meter in height while thanks to the double waterproof O-ring, the protection level reaches IP67. Each flashlight has a unique serial number so you can always take advantage of dedicated assistance for your product.

The dimensions are: (head diameter) 60.5 mm, (body diameter) 27 mm, (length) 198 mm while the weight is 336 ± 2 g (without battery). Included in the box we have: UB21-50 Li-ion battery, Type-C charging data cable, O-ring, Stainless steel pocket clip. The user interface is simple and intuitive: Half press the tail switch button once to activate high mode, release it to turn it off, Then, hard press the switch to make a "click" for light continue and press the "click" again to turn off the flashlight. Hidden mode can be activated by half-pressing more than 3 consecutive times in the off state. When the hidden mode is activated, the Strobe level will be the first. At this point, release the switch and then half press to immediately go to the low level. Low and strobe can be switched in one cycle. Press the switch firmly to lock the strobe or continuous low operation; in hidden mode, it will automatically exit hidden mode and return to high mode after power off for more than 1.5 seconds. When the battery power gets low, the flashlight light will flash, then replace the battery. When the battery power is used up, the main light of the flashlight will flash to remind you to charge the battery in time. When the battery power runs out, the flashlight will automatically stop working.

Features:

Material: Aluminum, black hard anodized

Reflective system: acrylic convex lens

Light source: special LEP module, wavelength 400-700nm, 6000-7000K, lifespan is about 10,000 hours

output:

Remarks: This test uses Weltool UB21-50 5000mAh 21700 rechargeable battery test, test environment: below 25 degrees Celsius, continuous lighting outdoors, (ambient temperature will affect runtime)

Battery: Use 1 21700 Li-ion rechargeable battery (included)

Switch: Tail button forward switch, 50,000 pressing life

High-efficiency drive circuit, no noise and no flicker

Temperature control protection: When the temperature of the flashlight is too high, the flashlight will automatically reduce the brightness to prevent overheating

with polarity protection

With low voltage prompt function

With battery over-discharge protection

304# stainless steel bezel, double-coated tempered glass lens

Passed the 1 meter drop test

Double O-ring waterproof, the protection level reaches IP67

Each flashlight has a unique serial number

Dimensions (±0.5mm): (Head diameter) 60.5mm, (Body diameter) 27mm, (Length) 198mm

Weight: 336±2g (without battery)

Included: UB21-50 lithium-ion battery, Type-C charging data cable, O-ring, stainless steel pocket clip

Instructions:

• First install the battery correctly

• Half-press the tail switch button once to turn on the high mode, release it to turn off, even if this operation is frequent, it will be high. At this time, press the switch hard to make a "click" sound to keep working continuously, and press the "click" again to turn off the flashlight.

• The hidden mode can be activated by half-pressing more than 3 consecutive times in the off state. When the hidden mode is turned on, the strobe is first. At this time, release the switch and then half-press it to switch to low immediately. Low and strobe can be switched in a cycle. Press the switch firmly to lock the strobe or low continuous operation; in the hidden mode, it will automatically exit the hidden mode and return to the high mode after shutting down for more than 1.5 seconds.When the battery power drops, the flashlight light will flash, please replace the battery in time.

• When the battery power is low, the main light of the flashlight will flash to remind you, please charge the battery in time.

• When the battery power is exhausted, the flashlight will automatically stop working.