Olight Perun 2 Headlamp

The Olight Perun 2 is an angular flashlight born as a direct upgrade of the previous Olight Perun version. This flashlight is powered by a high-performance 4000mAh 21700 Li-ion battery and its Turbo power is 2500 Lumens.

Charging is done using the supplied MCC3 model magnetic USB charging cable that allows fast charging up to 2A of current.
The Olight Perun 2 is equipped with a proximity sensor that is activated when the flashlight is too close to an obstacle and decreases the brightness thus increasing safety.
The Olight Perun 2 can be used for different scenarios: thanks to its angular design it can be used as a headlamp but it can also be used as a classic portable light with a comfortable handle.

The tailcap is flat so the flashlight can be used in tail standing. There is also a powerful neodymium magnet that allows the flashlight to be attached to any metal surface. On the tailcap there is also a small hole for the lanyard that comes bundled with the flashlight.
The belt clip is made of metal and is two-way, this allows you to attach the flashlight to jackets, belts, pockets and ziani in different positions.

On the head of the Olight Perun 2 there are dissipation fins that allow it to dissipate the heat produced by the powerful LED when using the flashlight on high levels.
With the Olight Perun 2 also comes an elastic band to use the flashlight as a front. It is soft and comfortable even when used for a long time. The flashlight attaches to the elastic band quickly and easily. The seal is exceptional, there is no danger of the flashlight accidentally detaching from the elastic band.
The switch is located on the head of the flashlight, it is electronic, rubberized, large, easily operated and very reactive.
The user interface is very simple: to turn the flashlight on and off, just a simple click on the switch, to change the levels just hold down the switch when the flashlight is on. The mode will be selected when the switch is released.
On the Perun 2 there is also direct access to Moonlight mode: from the torch off, press and hold the switch for over a second.
For direct access to the Turbo double click on the switch, for SOS instead triple click.
The Perun 2 also has the ability to set two auto-off timers for the light, one of 9 minutes and the other of 3 minutes.
There is also the electronic lockout of the interface which is activated by pressing and holding the switch for over two seconds. In addition to the electronic switch, there is also the possibility of mechanically locking the interface by slightly unscrewing the body of the flashlight from the head.

Body Material: Aluminum Alloy
Beam Distance: 544 ft（166m）
Max Performance: 2,500 lumens
Charging Type: MCC3 Magnetic Charging Cable
Compatible Batteries: Customized 4000mAh 21700 Battery (Included)
Max Light Intensity: 6,889 candela
Light Source: High Performance Cool White LED
Lens / Reflector Type: TIR Optic Lens
Mode Operation: Front Switch
Turbo: 2,500~800 lumens
Run time Turbo: 2 minutes + 175 minutes
High: 500 lumens
Run time High: 270 minutes
Med: 120 lumens
Run time Med: 18 hours
Low: 30 lumens
Run time Low: 66 hours
Moon: 5 lumens
Run time Moon: 12.5 days

TECHNICAL CHARACTERISTICS
Waterproof: IPX8
Weight: 5.68 oz (161 g)
Length: 4.75 in (120.7 mm)
Head Diameter: 1.13 in (28.6 mm)
Body Diameter: 1.06 in (27 mm)
Use: Everyday Carry, Car, Camping, Fishing, Household, EDC, General Use, Fishing, Climbing, Cave Exploration, Outdoor Activities, House Activities

What's include:
Perun 2 (Battery and Pocket Clip Included) x 1
Headband With Silicone Bracket x 1
MCC3 Magnetic Charging Cable x 1
Lanyard x 1
User Manual x 1