Nextorch WL13 Ultra-Bright Gun Light

The Nextorch WL13 is a tactical flashlight created exclusively to be mounted on the sled of a weapon. This flashlight is able to produce a maximum output with the turbo level of 1300 lumens. rotary switch that allows you to switch from one mode to another using both the right and left hand. The management of the interface is very simple: in particular it is possible to use the switch to directly access the momentary brightness or constant brightness. In fact, pressing the switch from the left side towards the other will activate the momentary mode of the light and the light will remain on as long as the switch is pressed upwards. If, on the other hand, you want to access constant brightness, just press the mutant switch from the left side down. In the opposite way, using the right hand, it is possible to press the switch upwards to activate the constant brightness or downwards to activate the momentary on. Directly on the torch there is the system that allows the coupling to the gun sleds. We have a Bolt adjustment rail that allows you to move and tighten the locking nut. In this way, the flashlight can be easily assembled and disassembled using just one hand. The attachment system is compatible with any Picatinny and Glock type sled. To mount the torch on the sled just insert it into the sled and rotate the block clockwise while to disassemble the torch just turn the block counterclockwise. The installation procedure is simple just follow the following steps: Unscrew the rail adjustment bolt with a hex wrench or screwdriver, push the rail adjustment bolt forward to loosen the moving gun rail, mount the gun with the head facing the front of the weapon And finally tighten the screws clockwise by hand and then continue to tighten them using a screwdriver or hex wrench. The Nextorch WL13 Can be used in conjunction with the TS41-L remote switch for long guns.

The torch is powered by two CR123A lithium batteries. But alternatively it is also possible to use rechargeable lithium-ion batteries of type 16340. The dimensions of the torch are 82 mm the length, 36 mm the width and 39 mm the height. while the weight is only 89 grams without batteries. The body is made entirely of aluminum alloy resistant to scratches, wear and bad weather and water resistance is given according to the IPX7 standard while resistance to falls is given up to 1 m in height. The output level is only one and allows the torch to be used for 03h15min with a maximum distance that can be reached of 180 m and a maximum luminous intensity of 8100 candles. The Nextorch WL13 It is a small and compact light torch designed exclusively for tactical environments and to be mounted on long or short weapons. Given its extremely small size, the flashlight can be easily stored inside a gun case inside a pouch but also in a pocket always ready to be used.

How To Installate
1.Loosen Rail-Adjustment Bolt by hexagonal wrench or screwdriver
2.Push the Rail-Adjustment Bolt forward to loosen the Moveable Rail
3.Make the WL13 with the reflector facing in the direction of the muzzle of the weapon, and the gun light can be preliminarily fixed by pushing the moveable rail tightly with one hand
4.Tighten the screws clockwise by hand and continue to tighten the clip with a screwdriver

SPECIFICATIONS
ANSI / PLATO-FL1	Momentary on	Constant on
Light Output	1300 Im	1300 Im
Run Time	—	3 h 15 min
Beam Distance	180 m	180 m
Beam Intensity	8100 cd	8100 cd
Impact Resistance	1 m
Waterproof	IPX7, 1 m
Weight and Dimensions	Weight: 89 g (Without Battery)
	Size: 82 mm (Length) x 36 mm (Width) x 39 mm (Height)
Material	Light Source: LED
	Aluminum
Battery	2 x CR123A/2 x 16340