Fenix E18R V2 High-performance EDC Flashlight

The Fenix E18R v2.0 arrives in a black and orange cardboard box with a durable plastic tray inside. In the package we find the Fenix E18R v2.0 flashlight, the battery, a charging cable, spare o-rings, belt clip pre-installed on the flashlight, wrist lanyard, user manual. The small Fenix E18R v2.0 is an EDC flashlight with 1200 lumens maximum output. It is powered by a 700mAH 16340 cell. The interface management switch is unique and is located near the head. It is made of metal, bronze colored with a beautiful workmanship with a fine knurling in concentric circles. Inside the side switch there is a small status LED that informs you when it is time to change the cell (Low Warning Power) and allows you to know the amount of residual charge inside the cell.

The package also comes with a belt clip already installed on the flashlight: this allows you to connect the flashlight to clothing, pockets, belts and backpacks. The tailcap is flat so the flashlight can be used as a candle then in tailstanding. Also on the tailcap there is a powerful neodymium magnet to be able to attach the flashlight horizontally, vertically and upside down to any metal surface. The Fenix E18R v2.0 is made entirely of A6061-T6 aluminum so Fenix used the classic HA III type hard anodized finish for the flashlight. The body has no knurling but there are small grooves in the battery tube which further aid in grip. There are also grooves on the tailcap that help slightly when removing the tailcap installation. The Fenix E18R v2.0 uses a Luminus SST-40 type cold light LED: It is well centered within a shallow TIR type lens. The lens is held in place by a small bezel in the same color as the button. The beam produced by the Fenix E18R v2.0 is well defined, homogeneous and clean. The dimensions are extremely compact: 67mm / 2.64 "in length, 22 mm / 0.87" the diameter of the head as well as that of the body.

The Fenix E18R v2.0 is a very small and very comfortable flashlight to keep in your pocket for everyday use. Its weight is only 36 grams / 1.27 oz without battery and 56 / 1.98 oz grams with battery. The user interface works as follows: with the flashlight off, press and hold the switch for 0.5 seconds to turn on the flashlight on the last level used. Press and hold the switch for 1.2 seconds to access the STrobo, while double-clicking to lock the interface. From flashlight on hold the switch for 0.5 seconds to turn off the flashlight, hold the switch for 1.2 seconds to access the strobe, single click to change the brightness level. The Fenix E18R v2.0 also has the memory mode that allows you to save the last level used except Turbo and Strobo. There is direct access to the Strobo if the switch is held down for 1.2 seconds both with the flashlight on and off. There is also a low voltage warning through the LED status indicator which will light up red when the battery is low. The status LED inside the side switch activates for three seconds each time the light is switched on showing: steady green light 100-85, green flashing light: 85-50%, steady red light 50-25%, flashing red light 25 -1%

Specifications

• Luminus SST40 LED with a lifespan of 50,000 hours
• A6061-T6 aluminum body
• HAIII hard-anodized anti-abrasive and corrosion-resistant finish
• Outputs (based on the included ARB-L16-700P)
  • Turbo: 1200 Lumens, 30 minutes, 479 ft
  • High: 350 Lumens, 1.33 hours, 266 ft
  • Med: 150 Lumens, 2.5 hours, 174 ft
  • Low: 30 Lumens, 15 hours, 76 ft
  • Moonlight: 1 Lumen, 200 hours, 30 ft
  • Strobe: 1200 Lumens
• 1 meter drop rating
• IP68 Rated Waterproofing: Fully submersible to 6 feet for up to 30 minutes
• Intelligent Overheat Protection: Regulates output levels automatically to prevent surface temperatures of above 140° Fahrenheit
• Up to 200 hours of light on a single charge
• USB Type-C Charging: Fully charges in about 1.33 hours (may vary depending on your AC adapter and charging cable)
• Perfect for commuting, navigating, maintenance, camping, and any other Everyday use!
• Electrical lockout: Double click the power button to activate or deactivate the lock
• Magnetic base and two-way pocket clip for hands-free use

Size

• Length: 2.64 inches
• Width: .87 inches
• Weight: 1.98 oz (including battery)