Convoy T3 14500 EDC Flashlight

Parameter:

Drive parameters

1. The flashlight is powered by a 1.5V battery or a 4.2V lithium battery. Switch the flashlight on or off by the tail switch (full click) or switch mode (Half-press).

The maximum output current is 0.5A when using a 1.5V battery, and the maximum output current is 1.5A when using a 4.2V lithium battery

2. Battery judgment function: When the voltage is above 2V, it is judged as a 4.2V battery, and when the voltage is below 2V, it is a 1.5V battery. It does not turn on when powered on by 2-2.8V.

3. Low voltage protection. When using a 4.2V battery, the voltage will flash 3 times slowly when the voltage is lower than 3V, and it will automatically shut down when the voltage is lower than 2.8V. When using a 1.5V battery, there is no low voltage protection.

At 4.2V, strobe (100%), slow flashing (30%), beacon (30%), battery detection (1%) SOS (20%), the above is the maximum brightness ratio.

if flashlight is turnedon,tap the switch 20 times quicklyto enter into config mode.(On a visual interface,as long as you click on an option, it means that the option is selected. The flashlight has no visual interface. It flashes to represent an option, and "tap the switch in the flashing process" means to select the option.)

Option 1(normal-flash 1 time+ buzz-flash):tap the switch to enter into sub-option to select the mode group,If the user has no operation, the config mode will enter option 2.

-------------sub-option 1.1 (normal-flash1 time) : tap the switch to select mode group 1 (1%、10%、30%、100%)

-------------sub-option 1.2 (normal-flash2 times) : tap the switch to select mode group2 (1% 10%、35%、100%、strobe、biking、batcheck)

-------------sub-option 1.3 (normal-flash3 times) : tap the switch to select mode group3 (100%、35%、10%、1%)

-------------sub-option 1.4 (normal-flash4 times) : tap the switch to select mode group4 (1% 20%、100%、strobe、biking、batcheck)

-------------sub-option 1.5 (normal-flash5 times) : tap the switch to select mode group5 (1%、20%、100%)

-------------sub-option 1.6 (normal-flash6 times) : tap the switch to select mode group6 (100%、20%、1%)

-------------sub-option 1.7 (normal-flash7 times) : tap the switch to select mode group7 (1% 10%、50%、strobe、biking、batcheck)

-------------sub-option 1.8 (normal-flash8 times) : tap the switch to select mode group 8(1%、10%、50%)

-------------sub-option 1.9 (normal-flash9 times) : tap the switch to select mode group9 (50%、10%、1%)

-------------sub-option 1.10 (normal-flash10 times) : tap the switch to select mode group10 (20%、100%)

-------------sub-option 1.11 (normal-flash11 times) : tap the switch to select mode group11 (100%、20%、strobe)

-------------sub-option 1.12 (normal-flash12 times) : tap the switch to select mode group 12(100%)

Option2(normal-flash 2 times+ buzz-flash):tap the switch to active the mode memory or inactive it,If the user has no operation,flashlight will enterinto the last mode.

battery-checkinstructions:

<2.95V1 flash,

2.95-3.25V2 flashes,

3.25-3.55V3 flashes,

3.55-3.85V4 flashes,

>3.85V5 flashes

Notice that there is no battery-check function if flashlight is powered by the 1.5V battery