Home / RovyVon / Rovyvon Aurora A26 USB-C EDC Thrower Flashlight
  • Rovyvon Aurora A26 USB-C EDC Thrower Flashlight
  • Rovyvon Aurora A26 USB-C EDC Thrower Flashlight
  • Rovyvon Aurora A26 USB-C EDC Thrower Flashlight
  • Rovyvon Aurora A26 USB-C EDC Thrower Flashlight
  • Rovyvon Aurora A26 USB-C EDC Thrower Flashlight

Rovyvon Aurora A26 USB-C EDC Thrower Flashlight

Quantity
ADD TO CART
BUY IT NOW
  • Detail

    The Aurora A26 is a multifunctional flashlight available for sale in different configurations: A26URW (UV / Red / White) and A26UWU (UV / White / UV). The light is made of polymeric material (polycarbonate) and metal and is particularly robust and resistant to wear and stress. The main LED is 6500K cool white that could boost up to 600 lumens on turbo mode

    The RovyVon Aurora A26 is powered by a single removable and replaceable 850mAH rechargeable lipo battery. It is equipped with a USB-C socket for fast and safe charging. To recharge, just use a classic USB-C cable associated with a USB adapter. A status LED will light red during charging or blue when charging is complete. It is located inside the body of the flashlight and is visible since it is the latter and is semi-transparent. In addition to the main LED, the Aurora A26 has a series of auxiliary LEDs on the side, ideal for example for reading or lighting in short distances: 4000K warm white reading light, 365 nm UV black light, and 625 nm red light for protecting night vision and as signal light in an emergency.

    In the lower part of the light there is a small ring for inserting the lanyard and wrist straps. The belt clip is made of steel, thin but very resistant. It offers a good grip on clothes, hat pockets or even MOLLE systems. The switch is lateral, metal and electronic. It is easily activated and is easily found even when you are in the dark or wearing gloves. The head of the Aurora A26 can be easily avoided to have access to the circuit and above all to the battery which in case of damage can be easily replaced. The body of the Aurora A26 is transparent and this allows you to see the inside of the flashlight and all the electronic components, but also allows the LEDs inside it to exploit the body of the flashlight as if it were a diffuser. In fact, the beam produced by the auxiliary LEDs is extremely diffused, without any defined spot and is perfect for short distances.

    The head has a metal bezel and allows the heat produced by the flashlight to be dissipated. In addition, when the temperature rises too much, the flashlight activates its temperature control system that allows you to automatically decrease the output and avoid damage caused by the excessive heat produced by the LED.

    The dimensions are 76 mm (Length) x 21.5 mm (Diameter); while the weight is 50.2 g / 1.77 oz. The Aurora A26 is a perfect EDC flashlight equipped with many functions: it has a powerful main led and secondary led useful in various occasions. The package comes with the following accessories: User manual, warranty card, Pocket clip, USB C-A cable, Charging port cover, Keyring, O-ring

    Parameters
    Front LED: 6500K cool white
    Battery capacity: 850mAh (charged via USB-C port)
    Size: 76mm (Length) x 21.5mm (Diameter); Weight: 50.2g/1.77oz
    Material: 1) Stainless steel (Light head, clip, and switches); 2) Polycarbonate (Body)

    User Interface

    Button 1 (For front light)
    1. Lock: with the light switched off, a long press for 5s to lock, and the front light will flash twice.

    *The operation below is under unlock status (check Button 2)
    2. Moon: with the light switched off, click to turn on, then click again to turn off.
    3. Constantly on (daily modes): rapid double click to turn on (memorized mode)
    (1) Change modes: click to cycle thru Low-Med-High-Turbo
    (2) Turn off: press 0.5s
    *The last-used mode will be memorized after the light was turned off.
    4. Emergency modes: rapid double click to turn on from Strobe mode
    (1) Change modes: click to cycle thru Strobe-SOS
    (2) Turn off: press for 0.5s

    Button 2 (for momentary on & Side LEDs)
    1. Unlock: with the light locked, long press for 3s to unlock, and the FRONT LIGHT will flash 3 times.
    2. Momentary on: with the light switched off, press and hold for Turbo mode of the FRONT LED, and release to turn off.
    3. Side LEDs
    (1) White
    A. Turn on: with the light switched off, single click
    B. Change modes: then click again to cycle thru Low-High
    (2) Red
    A. Turn on: Rapid double click to turn on from Low mode
    B. Change modes: click to cycle thru Low-High-Flash-Beacon
    (3) UV: Rapid triple click to turn on, then click to turn off
    (4) Turn off: press for 0.5s

  • Customer Reviews
    No comments