Nextorch iStar Rechargable Headlight
-
Detail
The Nextorch iStar is a small and light headlamp that offers a brand new experience thanks to the newly designed switch and thanks to its innovative design that guarantees two different types of Spot and Flood beam and the presence of a red LED.
As for the spot type beam, it is possible to adjust it from 20 lumens to 450 lumens through the switch that acts as a dimmer. Iron times therefore vary from 21 hours for the 20 lumen level up to 02h 30min for the 450 lumen level. The maximum distance that can be reached with the spot type beam is 80 m with a maximum light intensity of 1600 candelas. As for the Flood beam, on the other hand, we have two different types of output: a Low level of 14 lumens and 15 hours of autonomy with a maximum reachable distance of 4 m or 5 candles and a High level of 105 lumens with a runtime of 2 hours. and 45 minutes with a maximum achievable distance of 13 minutes and 40 candles. There is also an additional red LED for which it is possible to use a High light level of 14 lumens and 15 hours of autonomy or a flash light level with 14 lumens and 25 hours of autonomy. The dimensions of this light are 67mm long x 39mm wide x 32mm high. The weight is very light and is only 70 grams including the battery. The Nextorch iStar is powered by an internal 1100 mAh rechargeable lithium ion cell. It is recharged via the appropriate Type-C charging interface on the flashlight. A charge cycle is completed in 1.5 hours. The interface management switch is located in the upper part of the flashlight and allows access to all the available functions. Inside there is a small status LED that lights up in blue or red constantly or flashing: when it lights up constantly in blue it means that the capacity of the cell is between 75% and 100%, when it flashes blue it means that the residual cell capacity is between 50% and 75%, when it lights up with constant red light It means that the cell capacity is between 25% and 50 % while when it lights up with a flashing red light it means that the cell capacity is less than 25% and that the battery will need to be recharged in order to continue using the flashlight.
The band that comes supplied with the flashlight is elastic and particularly soft and allows you to use the flashlight for a long time. The flashlight is made of PC + ABS material which makes it particularly light resistant to shocks, scratches and bad weather. The water resistance is given according to the IPX4 standard while the impact resistance is given up to 1 m in height. The particular design of this flashlight allows you to switch from a fully directional Spot beam to a Flood beam with just one click. In fact, by pressing the button located above the flashlight near the switch, the head of the flashlight will open and allow the change of mode from flood to spot.
Specification ANSI/PLATO-FL1
Spotlight
Floodlight
Red Light
Stepless Dimming
High
Low
High
Flash
Light Output
20 Im ~ 450 Im
105 Im
14 Im
14 Im
14 Im
Run Time
21 h~2h30 min
2 h 45 min
15h
15h
25 h
Beam Distance
16 m ~ 80 m
13 m
4 m
—
—
Beam Intensity
64 cd-1600 cd
40 cd
5 cd
—
—
Impact 2q Resistance
1 m
Water Resistance
IPX4
Power
6 W
Weight and Dimensions
Weight: 70 g / 2.47 oz (With Battery)
Size: 67 mm (Length) x 39 mm (Width) * 32 mm (Height)
Material
Light Source: SunLike LEDs / Spot LED
PC+ABS
Battery
Built-in 1100 mAh Li-ion Battery
-
Customer ReviewsNo comments