Lumintop Thor Pro Rechargeable Flashlight

The Lumintop Thor Pro is a hybrid flashlight with two different types of light sources. In fact, it has an LED emitter (to illuminate at close range with a wide and powerful beam) and a LEP light beam (to illuminate at great distances). The package includes in addition to the Lumintop Thor Pro flashlight a USB-A to USB-C charging cable, user manual and tripod mounting ring. The dimensions of the Lumintop Thor pro are 68.5 mm X 51 mm X 153mm (Head X Tube X Length) while the weight is 628 g (Aluminum, battery excluded). The power supply of the flashlight is guaranteed by 4 button-top 18650 cells in parallel with each other. This means that the flashlight works equally well even with 1,2 or 3 batteries. Obviously in these last cases the runtimes will be proportional to the number of batteries used. The Lumintop Thor Pro has 5 brightness levels for the LED light beam divided as follows: Moonlight of 2 lumens with a runtime of 90 days, Low of 320 lumens with duration of 30 hours, Med of 1600 lumens with duration of 7 hours, High of 5100 lumens with a duration of 1 min 40 sec + 4h10 min and finally the Turbo level of 12100 lumens for a duration of 45s + 4h. The maximum intensity using the 8 LEDs the Thor Pro is equipped with as a light source is 57800 candles when the 12100 lumens turbo is switched on.

For the LEP beam, on the other hand, the output levels are divided as follows: Moonlight of 40 lumens and 20 hours of duration, Low of 85 lumens and 16 hours of duration, Med of 150 lumens and 10 hours of duration, 230 lumens and 6 h 30 min duration and finally the Turbo with 300 lumens and 18min + 5h45min. Despite the relative low power of the Turbo level of the LEP system, the beam is very concentrated and thanks to its 426,200 candles it can reach a maximum distance of 1300 meters. In addition, the Lumintop Thor Pro can also be used with the two different beams combined with each other to simultaneously have both a directive beam to illuminate at a distance and a wide and diffused beam to illuminate everything nearby.

The tail of the Lumintop Thor Pro can be unscrewed. The charging and discharging interfaces are hidden inside. In fact, the Lumintop Thor Pro can also be used as a normal powerbank to recharge any type of USB device. In addition to this there is also a small display that shows information on the state of charge and the state of the batteries.

The switch for managing the interface is electronic and is placed near the head. It has a small status LED inside. On the head there are deep dissipation fins that help disperse the heat produced on high levels.

The body of the flashlight is made of aluminum alloy with a hard anodized type III finish which makes the flashlight resistant to scratches and wear. The Thor Pro lumintop is also a safe flashlight: in fact, Overcharge protection, over-discharge protection, reverse protection, over-heat protection, low voltage protection are present.

Specifications

ANSI/NEMA FL1		Moonlight	Low	Med	High	Turbo
Output	LED	2LM	320LM	1600LM	5100LM	12100LM
	LEP	40LM	85LM	150LM	230LM	300LM
	Combo	45LM	400LM	1500LM	5200LM	12600LM
Runtime	LED	90D	30H	7H	1M40S+4H10M	45S+4H
	LEP	20H	16H	10H	6H30M	18M+5H45M
	Combo	18H	10H	5H	1M40S+4H30M	45S+4H
Intensity	LED	57800cd
	LEP	426200cd
Distance	LED	480m (Max)
	LEP	1300m (Max)
Impact Resistance		1m
Waterproof		IPX-8, underwater 2m
Size		68.5 X 51 X 153mm (HeadX TubeX Length)
Net Weight		628g (Aluminum, battery excluded)
Light Source		1 X White Laser Emitter + 8 X LEDs
Power		86.4W (Max)
Battery		1-4 X 18650, button-top, unprotected, max length 67mm (excluded)
Rechargeable		USB Type-C,max charging current 4A
Discharge/ Powerbank		USB Type-C, max discharge current 3A
Protection		Overcharge protection, over-discharge protection, reverse protection, over-heat protection, low voltage protection

Notice: The above appropriate parameters are lab-tested by using four 18650 Li-ion batteries, it may vary due to the difference in batteries types and environments. The runtime on High and Turbo are accumulated due to the over-heat protection setting.

OpperationInstruction