Lumintop Rattlesnake USB-C Rechargeable Flashlight

The Lumintop Rattlesnake is a compact but incredibly powerful multifunctional flashlight. It is equipped with a single SFP55 LED that allows you to pull out a maximum Turbo output of 16000 lumens. The Lumintop Rattlesnake is powered by two 21700 cells that guarantee it all the necessary power it needs and allow you to have very high runtimes using the flashlight on medium-low levels. normal output levels are 6 while 3 special flashing levels are also available, We have an Eco level of 3 lumes with a maximum runtime of 30 days, a Low level of 150 lumens with 18 hours of autonomy, Med level with 1000 lumens output and runtime 3 hours and 15 minutes, High level 1 with output of 4500 lumens and duration 50 seconds +3 hours, High level 2 of 10000 lumens with duration 30 seconds and 3 hours, Turbo level of 16000 lumens with duration 16 seconds and 3 hours. The Beacon, SOS and Beacon strobe levels have a maximum output of 10000 lumens. The maximum distance that the Turbo can reach is 800 m with a maximum light intensity of 160000 candles. the Beam produced by Lumintop Rattlesnake is wide and very bright and allows you to illuminate everything nearby but also from a great distance. It is ideal for a variety of scenarios, such as outdoor walks, tactical applications or search and rescue operations. The body is entirely made of aluminum alloy, the anodizing is well done and it is hard type III: this makes the Lumintop Rattlesnake extremely resistant to scratches, bumps and abrasions.

The head features a series of deep and thick dissipation fins that help dissipate the heat produced by the LED when the flashlight is turned on at medium / high levels. The Bezel protecting the lens is in brushed steel. The lens has an anti-reflective treatment, while the parabola is in aluminum with an orange peel treatment. The switch is placed on the side near the head. It is protruding, rubberized and inside it has a small status LED that provides information on the charge status of the cells. On the opposite side of the switch there is the Type-C charging port that allows the batteries to be recharged without having to remove them from the flashlight. It is well protected by a thick rubber cap that prevents dirt and water from getting inside. The Type-C port is compatible with QC3.0 / PD3.0 protocols and also works in discharge mode to allow the use of the flashlight as if it were a power bank for charging any USB device. The maximum discharge current is 5V 3 Ampere so it allows you to quickly charge for example your smartphone or tablet. An LED status indicator provides information on the charge / discharge status: during the charging phase it flashes, when the charge is complete the light remains steady, during the discharge phase it remains on constantly, while when the discharge is complete it turns off. The tail has large holes for the insertion of lanyards and small carabiners. Although it is not flat, it is still possible to use the flashlight in tailstanding. Water resistance is given up to 2 meters deep according to the IP68 standard, while resistance to falls up to 1.5 meters in height. Its dimensions are 48 mm x 131 mm (head x length) while the weight is 404g (battery included).